Stuart Ablett
Member
- Messages
- 15,917
- Location
- Tokyo Japan
It's all Vaughn's fault
I saw his nifty 3 point stand and had to make one........... and share it with you
OK, I have a piece of thicker MDF, six nails, a pair of pliers and a drill.....
I nip the heads off the nails, they would just get in the way
Now I have a leg, but the one end is sharp and pointy and the other is sharp from being nipped off, so...
I clamp a small piece of wood on my griding platform, so the drill chuck does not hit the platform and I spin the nails, ah, legs, so I can get a nice flat (for pounding) on one end, and a rounded end on the other where it will contact the piece being sprayed.......
I made two, side by side, one big, one smaller...
Yep, works good
but............. not for when the bowl is turned over.....................
So I pulled the legs, and cut one side down smaller............
I then attached it to a block to raise it up and a base to keep it from falling over.........
Works even better!
Yep, that will do......................thanks for the idea Vaughn!!
I've already tried it and it works great!
Cheers!
I saw his nifty 3 point stand and had to make one........... and share it with you
OK, I have a piece of thicker MDF, six nails, a pair of pliers and a drill.....
I nip the heads off the nails, they would just get in the way
Now I have a leg, but the one end is sharp and pointy and the other is sharp from being nipped off, so...
I clamp a small piece of wood on my griding platform, so the drill chuck does not hit the platform and I spin the nails, ah, legs, so I can get a nice flat (for pounding) on one end, and a rounded end on the other where it will contact the piece being sprayed.......
I made two, side by side, one big, one smaller...
Yep, works good
but............. not for when the bowl is turned over.....................
So I pulled the legs, and cut one side down smaller............
I then attached it to a block to raise it up and a base to keep it from falling over.........
Works even better!
Yep, that will do......................thanks for the idea Vaughn!!
I've already tried it and it works great!
Cheers!